大致命令如下：

git clone --depth 1 git@github.com:ZLMediaKit/ZLMediaKit.git
sudo apt-get install build-essential
sudo apt-get install cmake
#除了openssl,其他其实都可以不安装
sudo apt-get install libssl-dev
sudo apt-get install libsdl-dev
sudo apt-get install libavcodec-dev
sudo apt-get install libavutil-dev
sudo apt-get install ffmpeg
cd ZLMediaKit
vi .git/config
cat .git/config
mkdir build
cd build
#macOS下可能需要这样指定openss路径：cmake .. -DOPENSSL_ROOT_DIR=/usr/local/Cellar/openssl/1.0.2j/
cmake ..
make -j4

.git/config文件修改后内容如下：

[core]repositoryformatversion = 0filemode = truebare = falselogallrefupdates = true
[remote "origin"]url = git@github.com:ZLMediaKit/ZLMediaKitfetch = +refs/heads/master:refs/remotes/origin/master
[branch "master"]remote = originmerge = refs/heads/master
[submodule "ZLToolKit"]active = trueurl = git@github.com:ZLMediaKit/ZLToolKit
[submodule "3rdpart/jsoncpp"]active = trueurl = git@github.com:open-source-parsers/jsoncpp.git
[submodule "3rdpart/media-server"]active = trueurl = git@github.com:ireader/media-server
[submodule "www/webassist"]active = trueurl = git@github.com:1002victor/zlm_webassist

运行服务

cd ../release/linux/Debug
sudo systemctl stop nginx
# MediaServer绑定了80端口，所以需要先停掉nginx
sudo ./MediaServer -d &

注：服务器需开放554端口才能在本地访问到rtsp流

把mp4文件循环推给media server

ffmpeg -re -stream_loop -1 -i test.mp4 -vcodec h264 -acodec aac -f rtsp -rtsp_transport tcp rtsp://0.0.0.0/live/test